Join Our Newsletter
Receive the latest news on new promotions, exclusive offers, and new arrivals.
Gophinator Gopher Trap
Product Code: WCSGOPH
Description
Reviews
Specs
The Gophinator gopher trap eliminates the problem of trap shyness in a number of ways. It employs a powerful torsional type of mechanism which draws the gopher into a pivot point at the front of the trap and applies more than enough power to hold and kill even the largest adults quickly and consistently. The theory here is that if the gopher is killed on its first encounter with a gopher trap, it never gets the opportunity to learn to avoid traps. The design of the trap further reduces trap avoidance by providing the gopher with a clear path to the trigger--if the gopher walks mostly on dirt rather than wire on its approach to the trap trigger, it will be less likely to identify the trap as a potentially dangerous foreign object in its tunnel system, and thus will be more likely to enter the trap. Finally, the trap is constructed entirely out of high temper stainless steel wire, so unlike other gopher traps, The Gophinator will not lose power or trigger sensitivity due to rust. And it will stay effective through many years of use.
Placement of the Gophinator Gopher Trap
- Locate tunnels by using a 10 to12 inch long screwdriver or other metal rod to probe into soil and feel for the “give” when you hit a tunnel. For best results, probe along the perimeter of a 1 to 2 foot diameter circle around freshest mounds, or probe a transect half way between freshest mounds. Most tunnels are between 4 inches and 12 inches below surface. If activity is located on a slope, the tunnel will almost always be located on the uphill side of the mounds(when cleaning out a tunnel, they push the dirt down hill as miners push out tailings from a mine shaft).
- Using a trowel or shovel, dig a roughly six to eight inch diameter hole down to the tunnel. Clean out loose dirt from tunnels. If you have dug into the side of a tunnel, you must set traps in both directions. If you have by chance dug into the end of dead end section of tunnel, then you only need to set a single trap. If you feel that tunnels fork in the first six or eight inches into a tunnel, then dig back to the fork, and set traps in both forks of the tunnel. The traps should be inserted tines first and tines pointed upwards into the tunnels. Traps should be inserted far enough that the whole trap including the spring are inside the tunnel. Finally, I recommend a small dab of peanut butter be used as bait, which can be applied on the spring of the trap, or on the side of the tunnel near the spring of the trap. This will encourage the gopher to come through the tines of the set trap, and push his way through the trigger mechanism.
- After traps are set and baited, use a piece of cardboard or dirt clod to block off open end of tunnel behind trap, and fill in above this blockage with loose dirt so as to block off light from entering the tunnel. Gophers are often caught in the traps within a matter of hours, but for best results, check traps after 24 hours, and reset on any new activity.
Click here for Product Instructions
Currently Viewing Reviews with a rating of 5. Click here to reset.
★★★★★
4.85/5 Stars out of 33 Reviews
0
0
1
3
29
New Mexican (Gopher infestation ground zero) | June 14th, 2024
Gophinator traps are my new favorite. After struggling with another brand of trap I bought a dozen Gophinator traps and am pleased to report my success rate is very gratifying!
I can confirm a stainless steel lanyard and wire marking flag on each trap is super helpful.
How to dispose of the carcass? Burying it in the tunnel works for me.
Don Eversole | October 23rd, 2023
One of the best gopher traps I’ve ever used. Usually a catch within hours or less.
Jaime | January 30th, 2023
Tried two other similar style traps, the Gophinator being between the two in size which was almost perfect for the gopher's tunnel size. I bought another dozen and got 7 gophers out of the 13 traps set in one day. Definitely a good idea to attach a wire or string to stake in the ground, a few times I had to dig down the tunnel for the trap. I used thin rope tied to orange field flags so I could easily find them in the pasture. Easy to wash if needed, metal stays smooth even after being buried in the dirt.
Ken Podborny | November 17th, 2022
I have used Gophinator Gopher Traps for nearly 15 years. On my 6 acre property in North Texas, I average 75-100 gophers per year. \nEasy to use, most of my Business Clients were taught to handle their own gopher control quickly using Gophinator Traps. I keep some in inventory at all times. They last a long time especially if you rig them with 15 inches of 1/16 braided cable with crimped loops on both ends to prevent trap loss. I highly recommend these traps and also the mole version. Both are great tools.
Dalton | October 12th, 2022
I try other brands and always come back to these. USA made, quality, easiest trap to be successful.
Sheets | August 21st, 2022
After using cinch traps all my life, I got pretty comfortable with them. A neighbor had me do some trapping for him and he had this style of traps. They are easy to set (my 8 year old traps himself and can set them), they are small and compact to carry on the 4-wheeler and they work very well. I couldn't go back to cinch traps and had to get some for myself. The only downfall is I have to make my own wire loops at the top of the trap because they aren't long or big enough to put a sturdy stake through the hole on the trap itself. We realized true adulting is when you're excited to buy yourself these nice gopher traps!
Armando | June 20th, 2022
These traps are Great!
Skip Shipman | March 15th, 2022
Really impressed with the quality of these traps they should work great.
William Ostrander | February 5th, 2022
These traps work very well. Easy to use and extremely effective.
Russ | November 9th, 2021
I've tried several traps with limited success, until a neighbor got me onto these. \nThe trick is to buy 2, and hook them together on a 3 foot cable or chain. Dig until you find the tunnel spilt, and set one in each tunnel. I've got a 95%+ catch rate with these. \nThey don't rust and they're easy to set.
Brand:
Trapline Products
Weight:
.1 lbs. (.045 kg.)
Dimensions:
5 1/4" Long, 2 1/2" Strike Bar Spread
Target Pests:
Pocket Gopher
Description
The Gophinator gopher trap eliminates the problem of trap shyness in a number of ways. It employs a powerful torsional type of mechanism which draws the gopher into a pivot point at the front of the trap and applies more than enough power to hold and kill even the largest adults quickly and consistently. The theory here is that if the gopher is killed on its first encounter with a gopher trap, it never gets the opportunity to learn to avoid traps. The design of the trap further reduces trap avoidance by providing the gopher with a clear path to the trigger--if the gopher walks mostly on dirt rather than wire on its approach to the trap trigger, it will be less likely to identify the trap as a potentially dangerous foreign object in its tunnel system, and thus will be more likely to enter the trap. Finally, the trap is constructed entirely out of high temper stainless steel wire, so unlike other gopher traps, The Gophinator will not lose power or trigger sensitivity due to rust. And it will stay effective through many years of use.
Placement of the Gophinator Gopher Trap
- Locate tunnels by using a 10 to12 inch long screwdriver or other metal rod to probe into soil and feel for the “give” when you hit a tunnel. For best results, probe along the perimeter of a 1 to 2 foot diameter circle around freshest mounds, or probe a transect half way between freshest mounds. Most tunnels are between 4 inches and 12 inches below surface. If activity is located on a slope, the tunnel will almost always be located on the uphill side of the mounds(when cleaning out a tunnel, they push the dirt down hill as miners push out tailings from a mine shaft).
- Using a trowel or shovel, dig a roughly six to eight inch diameter hole down to the tunnel. Clean out loose dirt from tunnels. If you have dug into the side of a tunnel, you must set traps in both directions. If you have by chance dug into the end of dead end section of tunnel, then you only need to set a single trap. If you feel that tunnels fork in the first six or eight inches into a tunnel, then dig back to the fork, and set traps in both forks of the tunnel. The traps should be inserted tines first and tines pointed upwards into the tunnels. Traps should be inserted far enough that the whole trap including the spring are inside the tunnel. Finally, I recommend a small dab of peanut butter be used as bait, which can be applied on the spring of the trap, or on the side of the tunnel near the spring of the trap. This will encourage the gopher to come through the tines of the set trap, and push his way through the trigger mechanism.
- After traps are set and baited, use a piece of cardboard or dirt clod to block off open end of tunnel behind trap, and fill in above this blockage with loose dirt so as to block off light from entering the tunnel. Gophers are often caught in the traps within a matter of hours, but for best results, check traps after 24 hours, and reset on any new activity.
Click here for Product Instructions
Reviews
Write A Review
Currently Viewing Reviews with a rating of 5. Click here to reset.
★★★★★
4.85/5 Stars out of 33 Reviews
0
0
1
3
29
New Mexican (Gopher infestation ground zero) | June 14th, 2024
Gophinator traps are my new favorite. After struggling with another brand of trap I bought a dozen Gophinator traps and am pleased to report my success rate is very gratifying!
I can confirm a stainless steel lanyard and wire marking flag on each trap is super helpful.
How to dispose of the carcass? Burying it in the tunnel works for me.
Don Eversole | October 23rd, 2023
One of the best gopher traps I’ve ever used. Usually a catch within hours or less.
Jaime | January 30th, 2023
Tried two other similar style traps, the Gophinator being between the two in size which was almost perfect for the gopher's tunnel size. I bought another dozen and got 7 gophers out of the 13 traps set in one day. Definitely a good idea to attach a wire or string to stake in the ground, a few times I had to dig down the tunnel for the trap. I used thin rope tied to orange field flags so I could easily find them in the pasture. Easy to wash if needed, metal stays smooth even after being buried in the dirt.
Ken Podborny | November 17th, 2022
I have used Gophinator Gopher Traps for nearly 15 years. On my 6 acre property in North Texas, I average 75-100 gophers per year. \nEasy to use, most of my Business Clients were taught to handle their own gopher control quickly using Gophinator Traps. I keep some in inventory at all times. They last a long time especially if you rig them with 15 inches of 1/16 braided cable with crimped loops on both ends to prevent trap loss. I highly recommend these traps and also the mole version. Both are great tools.
Dalton | October 12th, 2022
I try other brands and always come back to these. USA made, quality, easiest trap to be successful.
Sheets | August 21st, 2022
After using cinch traps all my life, I got pretty comfortable with them. A neighbor had me do some trapping for him and he had this style of traps. They are easy to set (my 8 year old traps himself and can set them), they are small and compact to carry on the 4-wheeler and they work very well. I couldn't go back to cinch traps and had to get some for myself. The only downfall is I have to make my own wire loops at the top of the trap because they aren't long or big enough to put a sturdy stake through the hole on the trap itself. We realized true adulting is when you're excited to buy yourself these nice gopher traps!
Armando | June 20th, 2022
These traps are Great!
Skip Shipman | March 15th, 2022
Really impressed with the quality of these traps they should work great.
William Ostrander | February 5th, 2022
These traps work very well. Easy to use and extremely effective.
Russ | November 9th, 2021
I've tried several traps with limited success, until a neighbor got me onto these. \nThe trick is to buy 2, and hook them together on a 3 foot cable or chain. Dig until you find the tunnel spilt, and set one in each tunnel. I've got a 95%+ catch rate with these. \nThey don't rust and they're easy to set.
Specs
Brand:
Trapline Products
Weight:
.1 lbs. (.045 kg.)
Dimensions:
5 1/4" Long, 2 1/2" Strike Bar Spread
Target Pests:
Pocket Gopher
